What is the difference between seam binding and satin ribbon

Soft to the touch, perfect for adding a new luxurious edging trim to make do and mend projects. There are a some tutorials on the internet for attaching blanket binding but here are a few helpful hints: Satin blanket binding is often machine-stitched onto the blanket using a decorative, blanket stitch if your machine has one , zigzag stitch 2.

A "walking foot" may help to achieve a good result when machining. Hand sewing may result in a "puckered" finish. Generally, clear invisible , or matching colour thread is used. Blanket binding is usually applied at the head and foot of the flat piece of fabric, but it can be first securely pinned, using fine dressmakers pins applied perpendicular to the edge of the binding to prevent puckering , then stitched all the way around.

Pre-folded satin blanket binding is often supplied with the fold slightly off centre and it is the "shorter" side of the ribbon that you will need to keep on top as you machine stitch the blanket.

You will need to create neat, mitred corners on the blanket and backstitch the mitred pleats into place…. Blanket Binding - knitsewcraft. Keep in mind that this ribbon is not twill tape, polyester hem tape or single or double fold bias tape. It is a ribbon specially made to help with seas and make them last a lot longer. This is more of a time-consuming process than a complicated one. There are many applications to use to get seam binding ribbon on to your sewing project.

Here is just one. First , you need to pin and sew your seam like you normally would. Second , iron your seam to make sure it lies flat. Third , make sure all your fabric is pushed to the left of your needle. This may give you the wrong side of the fabric pointed in your direction. Now you can pin the seam binding to your fabric at this point but it is not necessary. Fourth , place the delicate and sheer seam binding ribbon in place and have about half of it overhanging your edge.

How far over depends on the thickness of your fabric. Fifth , stitch the seam binding ribbon in place till you get to the end of the fabric.

Then cut the ribbon about 1 inch past the end of the fabric. Next , fold the unsewn half of the ribbon over your hem. You may need to use pins here to make sure the ribbon stays where you want it. After you have folded the ribbon, iron it so it stays in place. After that , you want to return to your sewing machine and sew the last part of the seam binding in place.

And you are done. You should have a beautiful-looking seam binding that does not detract from the overall look of your sewing project. This can be a difficult task as corners are very hard to make look good when you try to seam bind them. There is a long process to getting these corners done well so they do not ruin your work or look bad.

One of the first steps you need to do is lay out your seam binding ribbon and see where the seams on it lay. You do not want the seam binding ribbon seams in the corners. So if they fall there, move them. Then back stitch for a few stitches and stop.

Then fold the edge of the ribbon up in the corner till you get a degree angle. Now you fold the next row of seam binding ribbon over the folded edge and sew the two together. After that you should cut the binding ribbon a tiny bit up to but not including or past your stitches and fold the ribbon over a bit. Then stitch it all into place. A little triangle of seam binding may appear during this process but you can trim it away easily. The newly cut piece of ribbon needs to be folded back over your sewing project, pinned into place and then sewn.

One of the differences between the two sewing applications is that biased tape is cut on a degree angle or what is called the bias. This tape is designed to stretch a bit which makes it very useful when you have a curve you have to sew through. Bias tape is better with armholes, necklines and finishing seams. The seam binder ribbon is just that, a ribbon. It does add strength, but it is limited in its use and is best used to cover rough edges or seams.

It also works on holding seams together. Twill tape is similar to seam binding in that it is a woven piece of ribbon only stronger. Where bias tape is good for being sewn around an edge of a garment to crate a finished hem, twill tape has more uses. Besides reinforcing seams, twill tape is good for reinforcing button holes, etc. While bias tape is meant to be seen, twill tape is not. One of the biggest differences between the two applications is that seam binding ribbon does not stretch.

It is used as a stabilizer for those seams that tear easily. Bias tape is usually used on the seen portions of your sewing project. Plus, it is used for those areas that require some stretch when in use. Then seam binding ribbon is usually a single layer of woven fabric whereas bias tape may have more than one layer. Also, bias tape works best in those areas of the fabric that need stretching in all directions. Seam binding ribbon only works lengthwise and cross wises. It has little give and not usually a good material for rounded portions of your sewing project.

That means you need to avoid curves when using seam binding ribbon. It is not good to use around arm holes, necklines, buttons, waistbands and more. Seam binding has a simple look to it. It is a woven roll of ribbon that is often made of rayon. It comes in a variety of colors so you can match the colors of your sewing project with ease.

Also, seam binding ribbon is often delicate and sheer. Its looks make it easy to work with without adding bulk.